Pulse-Bac Pin, Spring 420SS 1/8' x 1"

No reviews yet a Write a Review

Out of stock

SKU:: SKU-405470

Current Stock:

Description

Pulse-Bac Pin, Spring 420SS 1/8' x 1" (SKU-405470)

Replacement Pin for PulseBac Pulse Actuator

Customers Also Viewed

Polished Concrete Sealer - TK Bright Kure&Seal

TK Bright Kure&Seal

Concrete Protector WB 5 Gal

Prosoco

Concrete Protector WB 5 Gal

Prosoco Gem Tone Stain (60 oz) Welsh Slate

Prosoco

Prosoco Gem Tone Stain (60 oz) Welsh Slate

Saltguard (5 GAL)

Prosoco

Saltguard (5 GAL)

HEAT 27" Hi-Performance Burnishing Pad (Box of 5)

Prosoco

HEAT 27" Hi-Performance Burnishing Pad (Box of 5)

First Cut 5 Gal

Prosoco

First Cut 5 Gal

Pulse-Bac Cure & Seal Remover 5 Gal (PSC-46050-05GALCS)
Easy-to-use Consolideck® Cure & Seal Remover preps concrete floors and exterior flatwork for hardening and densifying or other penetrating protective treatments, as well as grinding, polishing and staining. Cure & Seal Remover quickly removes the toughest high-solids cure and seals from floors, patios, driveways and other concrete flatwork. That leaves the concrete free of old coatings that can block treatments from penetrating, or clog up the heads on grinding and polishing equipment. Cure & Seal Remover is water-rinsable and fully complies with all known VOC (volatile organic compound) regulations.

Prosoco

Prosoco Cure & Seal Remover 5 Gal

Pulse-Bac 4" Dust Grabber Seal Kit (2 seals & 1 clamp per kit) (103910)
Replacement Seals for 4" Dust Grabber

Pulse-Bac

Pulse-Bac 4" Dust Grabber Seal Kit (2 seals & 1 clamp per kit)

Pulse-Bac 7" Dust Grabber Seal Kit (2 seals & 1 clamp per kit) (103587-01)
Replacement seals for 7" Dust Grabber

Pulse-Bac

Pulse-Bac 7" Dust Grabber Seal Kit (2 seals & 1 clamp per kit)

Pulse-Bac 7" Dust Grabber 2 Case (12 retail ready units per case) (103985)
Dust Grabber™ shroud is designed to move air, this shroud is capable of eliminating 100% of suction lock, capture 99% of fugitive airborne dust, get to 1/8″ off the wall, and offers a lifetime replacement warranty. Shroud is designed to move air in and all around the shroud while working in unison with the vacuum to provide a more efficient and powerful collection of dust.

Pulse-Bac

Pulse-Bac 7" Dust Grabber 2 Case (12 retail ready units per case)

Pulse-Bac 1 Case - Replacement HEPA Certified Filters 1000/2000 Series (set of 3x4 sets) (103631)
Pulse-Bac® vacuum equipment comes equipped with patent pending Hepa rated H-13 P.T.F.E. coated Spun Bond Polyester twist on filters. Filters are made from 100% non-woven polyester, 10x more durable than paper or sock filters and able to capture dust particles as small as .012 micron. Filters have a high burst strength and are resistant to abrasive water, heat and other chemicals.

When using a filter pulsing system filters made from a SBP media with P.T.F.E coating are the best material to use. The SBP surface does not permit particles to become embedded in the material as in the case of felt, paper or sock filters. Since the media is produced from a continuous fiber it is not prone to fiber migration or linting. SBP filters are much more rugged than paper filters and allow pulse cleaning of the spun bond media to be more effective.

CDCLarue Hepa Certified filters are capable of capturing particles as small as .012 microns and exceed EPA, OSHA & NIOSH regulations when using a Hepa Certified Filter.

Includes filters for:

PB-1050H
PB-1000 Series
PB-2000 Series

Pulse-Bac

Pulse-Bac 1 Case - Replacement HEPA Certified Filters 1000/2000 Series (set of 3x4 sets)

Pulse-Bac 500 Series Dolly (103922)

Pulse-Bac

Pulse-Bac 500 Series Dolly