Laticrete Drytek Epoxy Primer 10 Gal (LCS-4168)
DRYTEK Epoxy Primer is a two component, high-solids epoxy primer applied with a sand broadcast –for use with DRYTEK® decorative wear surfaces.

Ultimate bond for decorative wear surfaces.
Easily roller applied
Provides a barrier between decorative wear surfaces and substrate below.
Reduced pinholes in the decorative topping.

Brand: Laticrete

Laticrete Drytek Epoxy Primer 10 Gal

No reviews yet a Write a Review

Out of stock

SKU:: LCS-4168

Current Stock:

Description

Laticrete Drytek Epoxy Primer 10 Gal (LCS-4168)

DRYTEK Epoxy Primer is a two component, high-solids epoxy primer applied with a sand broadcast –for use with DRYTEK^® decorative wear surfaces.

Ultimate bond for decorative wear surfaces.
Easily roller applied
Provides a barrier between decorative wear surfaces and substrate below.
Reduced pinholes in the decorative topping.

Customers Also Viewed

Laticrete Aquapel 1 Gal (LCS-12XX-1)
L&M™ AQUAPEL™ is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic bearing concrete. L&M AQUAPEL penetrates concrete surfaces and chemically bonds directly with the substrate which results in a surface that is highly resistant to the attacks of both moisture and salt.

Formulated to stop moisture and salt penetration.
Odorless/VOC compliant formulation.
Ready-to-use, non-flammable, non-volatile, waterborne formulation.
Environmentally safe.
Invisible, non-darkening.
No Film. Leaves surfaces breathable.

Laticrete

Laticrete Aquapel 1 Gal

Laticrete Permaguard SPS 5 Gal

Laticrete

Laticrete Permaguard SPS 5 Gal

Laticrete Drytek Levelex Primer 1 Gal (LCS-4171)
DRYTEK LEVELEX Primer is a concentrated premium quality, water-based primer designed to be applied prior to the installation of DRYTEK® self-leveling underlayments & toppings. Contains acrylic polymers and selected surface activation agents which penetrate deeply into the substrate and maximize bond strength.

DRYTEK LEVELEX Primer can be used on a wide range of substrates.
DRYTEK LEVELEX Primer may be broom, roller, or spray applied.

Laticrete

Laticrete Drytek Levelex Primer 1 Gal

Laticrete Drytek Levelex (LCS-4111)
DRYTEK LEVELEX is a cement-based easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile. DRYTEK LEVELEX provides a smooth and flat surface on which finished floor goods can be installed. DRYTEK LEVELEX can be placed from 1/8–3" (3–76 mm) in a single lift.

Pourable and pumpable
Inorganic; will not contribute to mold/mildew growth
Suitable surface for most finished floor goods
Can be applied directly over concrete testing at RH of 95% or less per ASTM F2170

Laticrete

Laticrete Drytek Levelex

Laticrete Drytek Epoxy Primer 2 Gal (LCS-4168-2)
DRYTEK Epoxy Primer is a two component, high-solids epoxy primer applied with a sand broadcast –for use with DRYTEK® decorative wear surfaces.

Ultimate bond for decorative wear surfaces.
Easily roller applied
Provides a barrier between decorative wear surfaces and substrate below.
Reduced pinholes in the decorative topping.

Laticrete

Laticrete Drytek Epoxy Primer 2 Gal

Floorguard Products Aspartic 100 Slow Go 3 Gallon (FGP-8801)
Aspartic 100 is a two component, 100% solids polyaspartic aliphatic urethane coating. The outstanding feature of this product is its exceptionally rapid curing time of approximately 1-2 hours for light foot traffic, but also has superior chemical resistance, hardness, abrasion resistance and UV stability. It is recommended for areas where a high build broadcasted floor is desired and installation downtime is very limited. Product sold in 3 & 15 gallon kits. It is available in clear or pigmented colors; pigmented kits include 1 pint of pigment, using 5-6 oz. of pigment per blended gallon.

Floorguard Products

Floorguard Products Aspartic 100 Slow Go 3 Gallon

SureCrete D-FRC Backer 50 lb. Bag Gray (SCR-45101006)
D-FRC Backer 50 lb. Bag - Gray Glass Fiber Reinforced Concrete Mix.

SureCrete

SureCrete D-FRC Backer 50 lb. Bag Gray

ACS-CPS250-Daily Rental Rate

ACS-CPS250-Daily Rental Rate

SealBoss 6500 Quickfix Joint Filler (Gray) 22 oz. Twin Cartridge w/ Static Mixing Nozzle (SEAL-BC6500)
SealBoss ® 6500 QuickFix Joint Filler is a technologically advanced multiple application product. This polyurea is a self leveling, 100% solids, two component, 1:1 ratio, very flexible elastomer. SealBoss ® 6500 QuickFix is an excellent joint and crack filler for concrete in applications that are time critical. It works well in adverse temperature conditions as the material cures rapidly in ambient temperatures from -20F to 130F. The tack free time is 5 to 15 minutes. This permits to reopen the jobsite to vehicle and foot traffic just one hour after the application.

SealBoss

SealBoss 6500 Quickfix Joint Filler (Gray) 22 oz. Twin Cartridge w/ Static Mixing Nozzle

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier (RF14-115K)
4 1/2" Metabo Renovation Mill/Scarifier

World Diamond Source

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier

Laticrete Seal Hard 5 Gal

Laticrete

Laticrete Seal Hard 5 Gal

Laticrete Lion Hard 5 Gal

Laticrete

Laticrete Lion Hard 5 Gal