World Diamond Source 5" Metabo Grinder Kit (RS14-125K)
Metabo 5" Pro Series Grinder w/ Dust Control Shroud

Brand: World Diamond Source

World Diamond Source 5" Metabo Grinder Kit

No reviews yet a Write a Review

$557.14

Qty:

SKU:: RS14-125K

Current Stock:

Description

World Diamond Source 5" Metabo Grinder Kit (RS14-125K)

Metabo 5" Pro Series Grinder w/ Dust Control Shroud

Customers Also Viewed

CPS Electric Rover Kit (CPS-GPMC0325K)
The all new CPS Rover. 230/3 phase or 480/3 phase powered remote ride-on grinder. It has motorized wheels with zero radius turn. 5 speed settings to dial in the pace based upon the tools you're using. Both gravity fed and pump spray mister. Removable travel wheel and both forward and rear facing LED lights.

CPS

CPS Electric Rover Kit

$39,900.00

CPS G250 Grinder Kit- electric (CPS-GPMC0063K)
The CPS G-250 is an easy to operate planetary grinder that packs a punch with a 10HP electric motor. Its lightweight and narrow aluminum frame and single phase power requirements are perfect for residential and light comm

Technical Data
• Power Requirements: Single-phase / 230v / 30 amp
• Grinding Pressure: 342-414 lbs
• Grinding Width: 25”
• Weight: 600 lbs
• Motor: 10 hp
• Engine Speed: Variable to 1,800 RPM

CPS

CPS G250 Grinder Kit- electric

$16,900.00

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier (RF14-115K)
4 1/2" Metabo Renovation Mill/Scarifier

World Diamond Source

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier

$514.29

CPS G170 Grinder Kit (CPS-GPMC0319KIT)
The CPS G-170 is our 17" light duty grinder. It has a single head, variable speed, and forward/reverse to make it adaptable to most jobs and 5HP 1/220V to make it aggressive. Uses 6 tools and can run metals, hybrids, and resins. Excellent for a rental fleet or start-ups.

The G-170 single-head grinder is an easy-to-operate planetary grinder great for first time grinders or polishers! Its lightweight and narrow frame and single phase power requirements are perfect for residential and light commercial applications. Its innovative three-head design enables the tooling to roll with the contour of the floor, while the variable speed option gives peak productivity. The heavy duty G-170 design is intended for long life • Narrow, lightweight frame • Great for light-duty applications • Easy to use

Technical Data
• Grinding Pressure: 140 lbs
• Width: 17”
• Weight: 270 lbs
• Motor: 5 hp
• Motor Speed: Variable 400 to 900 RPM

CPS

CPS G170 Grinder Kit

$6,500.00

CPS G210 Grinder (CPS-GPMC0321) - go2acs.com
The CPS G-210 is our 21" light duty grinder. It has a single head, variable speed, and forward/reverse to make it adaptable to most jobs and 5HP 1/220V to make it aggressive. Uses 6 tools and can run metals, hybrids, and resins. Excellent for a rental fleet or start-ups.

The G-210 single-head grinder is an easy-to-operate planetary grinder great for first time grinders or polishers! Its lightweight and narrow frame and single phase power requirements are perfect for residential and light commercial applications. Its innovative design enables the tooling to roll with the contour of the floor, while the variable speed option gives peak productivity. The heavy duty G-210 design is intended for long life • Narrow, lightweight frame • Great for light-duty applications • Easy to use

CPS

CPS G210 Grinder

$6,900.00

CPS

CPS G290 Propane Grinder Kit

$19,500.00

CPS G320 DPro Grinder Kit (CPS-GPMC0097K)
The CPS G320DPro is an extremely effective, heavy duty grinder. The 31HP propane engine is ideal to withstand the workout of heavy coatings removal and surface preparation, grinding and polishing concrete, terrazzo, marble, and granite.
Technical Data
• Power Requirements: 30 lbs. Vapor Draw Propane Tank with Battery Start
• Grinding Pressure: 565 - 715 lbs.
• 13 Gallon Gravity Feed Water Tank
• Grinding Width: 32”
• Weight: 896 lbs.
• Engine: 31 hp
• Engine Speed: Variable to 3,600 RPM

CPS

CPS G320 DPro Grinder Kit

CPS Complete Regulator Assembly for G320 Pro (APMF-6005)
Regulator assembly for G320DPro. Includes fuel shutoff solenoid and brass elbow.

CPS

CPS Complete Regulator Assembly for G320 Pro

$480.00

CPS CAT-5 HEPA Extractor Vacuum - Used (CPS-GPMC0012K-U)
(This vacuum is approximate 5 years old and still works very well) The Cat-5 Dust Extractor’s design helps you maintain focus on the job and not downtime. This system’s pleated primary filter elements, with non-stick coatings, have excellent dust release to prevent filter blinding and motor overheating. It has a unique backwash system where 100% of the backwash goes directly to the bag creating no down time beating on the filter. The HEPA filter has three times more usable surface area than other comparable vacuums allowing for a greater amount of airflow while capturing more debris. Compatible with Cat-5 Dust Interceptor Continuous bagging system for easy clean-up Large diameter dump valve means faster discharge time for the collected dust Heavy duty welded frame construction with powder coated finish One of the most efficient vacs on the market generating a 120” waterlift on 400 CFM More suction with less stress to the motor
Technical Data
• Power Requirements: Three-phase / 460v / 15 amp
• Weight: 650 lbs
• Motor: 8.5 hp
• AirFlow: 400 CFM
• Waterlift/Hg: 120”/8.5”
• Warranty: One Year

CPS

CPS CAT-5 HEPA Extractor Vacuum - Used

$12,500.00 $6,000.00

CPS CAT-5 HEPA Extractor Vacuum (CPS-GPMC0012K)
The Cat-5 Dust Extractor’s design helps you maintain focus on the job and not downtime. This system’s pleated primary filter elements, with non-stick coatings, have excellent dust release to prevent filter blinding and motor overheating. It has a unique backwash system where 100% of the backwash goes directly to the bag creating no down time beating on the filter. The HEPA filter has three times more usable surface area than other comparable vacuums allowing for a greater amount of airflow while capturing more debris. Compatible with Cat-5 Dust Interceptor Continuous bagging system for easy clean-up Large diameter dump valve means faster discharge time for the collected dust Heavy duty welded frame construction with powder coated finish One of the most efficient vacs on the market generating a 120” waterlift on 400 CFM More suction with less stress to the motor

Technical Data
• Power Requirements: Three-phase / 460v / 15 amp
• Weight: 650 lbs
• Motor: 8.5 hp
• AirFlow: 400 CFM
• Waterlift/Hg: 120”/8.5”
• Warranty: One Year

CPS

CPS CAT-5 HEPA Extractor Vacuum

$10,500.00

CPS 5”-7” Metabo Variable Speed Mini-Polisher (CPS-GPMC0008)
700-2200 rpm coated motor windings protect from overheating under load, extreme torque with spindle lock

Polisher, Size (In.)5-7, No Load RPM 700 to 2200, Amps @ 120V 10.0, Spindle Thread Size (In.) 5/8-11, Cord 108 In., Variable Speed, Speed Control, Overload Protection, Spiral-Bevel Gears

This Variable Speed Mini-Polisher is a versatile, aggressive hand tool that is ideal for edge work, counter tops, and any other hand-held grinding application. This angle grinder has variable speed options, tool-less adjustment, and high performance spiral bevel gears. There is a coated motor winding to protect from overheating under load, and an adjustable position side handle is attachable on left or right to suit any job . 700-2,200 RPM range 5” - 7” pad diameter. DON'T FORGET TO CHECK OUT OUR SHARKS DISKS AND SPEEDLINE POLISHING PADS!

CPS

CPS 5”-7” Metabo Variable Speed Mini-Polisher

$289.00

CPS Handle Bar Tightener Clamp

$35.00