World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier (RF14-115K)
4 1/2" Metabo Renovation Mill/Scarifier

Brand: World Diamond Source

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier

No reviews yet a Write a Review

Out of stock

SKU:: RF14-115K

Current Stock:

Description

World Diamond Source 4 1/2" Metabo Renovation Mill/Scarifier (RF14-115K)

4 1/2" Metabo Renovation Mill/Scarifier

Customers Also Viewed

CPS 5”-7” Metabo Variable Speed Mini-Polisher (CPS-GPMC0008)
700-2200 rpm coated motor windings protect from overheating under load, extreme torque with spindle lock

Polisher, Size (In.)5-7, No Load RPM 700 to 2200, Amps @ 120V 10.0, Spindle Thread Size (In.) 5/8-11, Cord 108 In., Variable Speed, Speed Control, Overload Protection, Spiral-Bevel Gears

This Variable Speed Mini-Polisher is a versatile, aggressive hand tool that is ideal for edge work, counter tops, and any other hand-held grinding application. This angle grinder has variable speed options, tool-less adjustment, and high performance spiral bevel gears. There is a coated motor winding to protect from overheating under load, and an adjustable position side handle is attachable on left or right to suit any job . 700-2,200 RPM range 5” - 7” pad diameter. DON'T FORGET TO CHECK OUT OUR SHARKS DISKS AND SPEEDLINE POLISHING PADS!

CPS

CPS 5”-7” Metabo Variable Speed Mini-Polisher

World Diamond Source 5" Metabo Grinder Kit (RS14-125K)
Metabo 5" Pro Series Grinder w/ Dust Control Shroud

World Diamond Source

World Diamond Source 5" Metabo Grinder Kit

CPS G320 DPro Grinder Kit (CPS-GPMC0097K)
The CPS G320DPro is an extremely effective, heavy duty grinder. The 31HP propane engine is ideal to withstand the workout of heavy coatings removal and surface preparation, grinding and polishing concrete, terrazzo, marble, and granite.
Technical Data
• Power Requirements: 30 lbs. Vapor Draw Propane Tank with Battery Start
• Grinding Pressure: 565 - 715 lbs.
• 13 Gallon Gravity Feed Water Tank
• Grinding Width: 32”
• Weight: 896 lbs.
• Engine: 31 hp
• Engine Speed: Variable to 3,600 RPM

CPS

CPS G320 DPro Grinder Kit

Wooster Big Ben Frame (WSTR-BR045)
Big Ben Frame 18"

Wooster Brush

Wooster Big Ben Frame

CPS Complete Regulator Assembly for G320 Pro (APMF-6005)
Regulator assembly for G320DPro. Includes fuel shutoff solenoid and brass elbow.

CPS

CPS Complete Regulator Assembly for G320 Pro

CPS Electric Rover Kit (CPS-GPMC0325K)
The all new CPS Rover. 230/3 phase or 480/3 phase powered remote ride-on grinder. It has motorized wheels with zero radius turn. 5 speed settings to dial in the pace based upon the tools you're using. Both gravity fed and pump spray mister. Removable travel wheel and both forward and rear facing LED lights.

CPS

CPS Electric Rover Kit

Pulse-Bac Hum-B Polisher: (VS Makita Grinder) Takes Diamond Polishing Rings (103622-12)
The Hum-B Floor Grinder and the Polisher can cover more square feet in less time, with less effort while maximizing comfort and increasing productivity. The ergonomically designed floor grinder and polisher allow the user to grind or polish the floor standing upright. Getting the user up off of their knees reduces fatigue, backaches, and job site injuries. Hum-B Floor Grinding equipment is ideal for grinding or polishing concrete, terrazzo, stone, and masonry or removing paint, thin set, adhesives, VCT, mastic and epoxy floor coatings. Hum-B floor grinders are the only floor surfacing equipment equipped with the patented Dust Grabber™ dust shroud. This shroud allows the grinder to float across the surface like a puck on ice, eliminating suction lock and capturing 99% of airborne dust.

Hum-B floor grinders come with a 2” Dust Port, 150 watt Halogen Light, Non-Marking Caster Wheels, a 6000 RPM or 3500 RPM polisher/grinder and a 1 Year Warranty. Different types of abrasives are available to use with the HUM-B Floor Grinder. From cup wheels, to remove epoxy coatings or prepping a concrete floor for a new application; to polishing rings, for polishing concrete, stone and terrazzo.

To achieve a dust free operation we strongly recommend using a Pulse-Bac® PB-1050 dust vacuum to capture the dust generated by the grinder. If using the grinder to remove paint from floors, a PB-1050H HEPA Certified dust vacuum is recommended and complies with EPA RRP rules for Lead Paint and exceeds OSHA 2016 Silica rules for vacuums.

Pulse-Bac

Pulse-Bac Hum-B Polisher: (VS Makita Grinder) Takes Diamond Polishing Rings

CPS G-120 Multi - 1/220 Kit (CPS-GPMC0098K)
CPS Edger touts an impressive, 3 hp motor and over 100 lbs of down pressure without any added weight. Both variable speed and reversible, the Edger is designed to reach under low overhangs and has the added convenience of using the same tooling as your G320D or G250!

DON’T LET ITS SMALL SIZE FOOL YOU. The most aggressive, effective edge grinder on the market, the CPS Edger touts an impressive, three hp motor and over 100 lbs of down pressure without any added weight. Both variable in speed and reversible, The Edger is designed to reach under low overhangs and has the added convenience of using the same tooling as your G-320 or G-250 model. This is the ultimate in innovation, allowing you to get big machine capability into otherwise impossible places. • The planetary design contours to the floor • Get big machine capability in small spaces • Works with standard diamond tooling, cup wheels, and Quik-Change Plates • Customizable to either 220 v single phase, or 480 v three phase power

Technical Data
• Power Requirements: Three-phase / 480v / 30 amp Single-phase / 230v / 30 amp
• Grinding Width: Adaptable 7” - 10.5”
• Grinding Pressure: 100 lbs
• Weight: 355 lbs
• Motor: 3 hp
• Engine Speed: Variable to 750 RPM

CPS

CPS G-120 Multi - 1/220 Kit

CPS G320 D Grinder Kit (CPS-GPMC0066K)
The CPS G320D is an extremely effective, heavy duty grinder. The 20HP electric motor is ideal to withstand the workout of heavy coatings removal and surface preparation, grinding and polishing concrete, terrazzo, marble, and granite.
Technical Data
• Power Requirements: 3-phase / 460v / 30 amp
• Grinding Pressure: 715 lbs
• Grinding Width: 32”
• Weight: 896 lbs
• Motor: 20 hp
• Engine Speed: Variable to 1,800 RPM

CPS

CPS G320 D Grinder Kit

World Diamond Source S-Cup Aggressor (SCUP7-1)
7" x 7/8" -5/8" Aggressor 16/20 grit grinding cup for hand grinder.

World Diamond Source

World Diamond Source S-Cup Aggressor

CPS 7 Inch Disc, Flap Shark Medium (CPS-GPDI0452)
Medium grit diamond and carbide flap
disk pre-threaded for a standard 5/8 11
arbor. Will fit most hand grinders on the
market. This medium grit tool does the
trick when the coarse is too aggressive.

CPS

CPS 7 Inch Disc, Flap Shark Medium

CPS CAT-5 HEPA Extractor Vacuum - Used (CPS-GPMC0012K-U)
(This vacuum is approximate 5 years old and still works very well) The Cat-5 Dust Extractor’s design helps you maintain focus on the job and not downtime. This system’s pleated primary filter elements, with non-stick coatings, have excellent dust release to prevent filter blinding and motor overheating. It has a unique backwash system where 100% of the backwash goes directly to the bag creating no down time beating on the filter. The HEPA filter has three times more usable surface area than other comparable vacuums allowing for a greater amount of airflow while capturing more debris. Compatible with Cat-5 Dust Interceptor Continuous bagging system for easy clean-up Large diameter dump valve means faster discharge time for the collected dust Heavy duty welded frame construction with powder coated finish One of the most efficient vacs on the market generating a 120” waterlift on 400 CFM More suction with less stress to the motor
Technical Data
• Power Requirements: Three-phase / 460v / 15 amp
• Weight: 650 lbs
• Motor: 8.5 hp
• AirFlow: 400 CFM
• Waterlift/Hg: 120”/8.5”
• Warranty: One Year

CPS

CPS CAT-5 HEPA Extractor Vacuum - Used