CPS G320D Series Main Pulley Belt

No reviews yet a Write a Review

$208.02

Qty:

SKU:: CPS-APMF0245

Current Stock:

Description

CPS G320D Series Main Pulley Belt (CPS-APMF0245)

Replacement Belt for G320D Series Grinders

Customers Also Viewed

CPS Handle Bar Tightener Clamp

$35.00

Add to Cart

CPS G320 DPro Grinder Kit (CPS-GPMC0097K)
The CPS G320DPro is an extremely effective, heavy duty grinder. The 31HP propane engine is ideal to withstand the workout of heavy coatings removal and surface preparation, grinding and polishing concrete, terrazzo, marble, and granite.
Technical Data
• Power Requirements: 30 lbs. Vapor Draw Propane Tank with Battery Start
• Grinding Pressure: 565 - 715 lbs.
• 13 Gallon Gravity Feed Water Tank
• Grinding Width: 32”
• Weight: 896 lbs.
• Engine: 31 hp
• Engine Speed: Variable to 3,600 RPM

CPS

CPS G320 DPro Grinder Kit

CPS

CPS G290 Propane Grinder Kit

$19,500.00

Add to Cart

CPS 3" Velcro Hook Circles (CPS-0226)
3" Velcro Hook Circles

CPS

CPS 3" Velcro Hook Circles

$1.28

Add to Cart

CPS Rover Kit (CPS-GPMC0324K)
The all new CPS Rover. Propane powered remote ride-on grinder. It has motorized wheels with zero radius turn. 5 speed settings to dial in the pace based upon the tools you're using. Both gravity fed and pump spray mister. Removable travel wheel and both forward and rear facing LED lights.

CPS

CPS Rover Kit

$39,900.00

Add to Cart

CPS MACH Series - Mach 3P (CPS-GPDI04MA-3P)
* Transitions straight to SEKTOR tools
* Replaces metal bonds on 90% of concrete floors
* Lasts for approximately 8,000 square feet
* Doesn't glaze up on hard concrete

CPS

CPS MACH Series - Mach 3P

$42.00

Add to Cart

CPS CAT-4 Vacuum (CPS-GPMC0301)
Our all new CAT 4 HEPA dust collector is compact but powerful enough (267CFM and 97" waterlift) to keep up with up to 25 inch grinders. Its 3 motor design with self purging filters allows for continuous runtime. 110 volt requirement means it can be plugged into any standard outlet. Comes with 29 feet of hose and a rubber squeegie wand.

The CAT-4 VAC’s design increases efficiency on the job by decreasing downtime. This machine has been designed for dry pickup on smaller jobs, and is easily transportable, so it can be taken anywhere. Additionally, the triple-HEPA filter design allows for more air flow while capturing more debris. The entirety of the innovative design also requires only single phase power, and is compact enough for residential and light commercial applications! *American-style" DOP certified HEPA filtration

Technical Data
• Power Requirements: 110V 20amps 60HZ
• Weight: 95 lbs.
• CFM/Waterlift: 265 / 97”
• Dust Collection: Longo Pack Continuous Bagging

CPS

CPS CAT-4 Vacuum

$2,600.00

Add to Cart

CPS

CPS SuperShaver - 21hp

$24,900.00

Add to Cart

CPS G-120 Multi - 1/220 Kit (CPS-GPMC0098K)
CPS Edger touts an impressive, 3 hp motor and over 100 lbs of down pressure without any added weight. Both variable speed and reversible, the Edger is designed to reach under low overhangs and has the added convenience of using the same tooling as your G320D or G250!

DON’T LET ITS SMALL SIZE FOOL YOU. The most aggressive, effective edge grinder on the market, the CPS Edger touts an impressive, three hp motor and over 100 lbs of down pressure without any added weight. Both variable in speed and reversible, The Edger is designed to reach under low overhangs and has the added convenience of using the same tooling as your G-320 or G-250 model. This is the ultimate in innovation, allowing you to get big machine capability into otherwise impossible places. • The planetary design contours to the floor • Get big machine capability in small spaces • Works with standard diamond tooling, cup wheels, and Quik-Change Plates • Customizable to either 220 v single phase, or 480 v three phase power

Technical Data
• Power Requirements: Three-phase / 480v / 30 amp Single-phase / 230v / 30 amp
• Grinding Width: Adaptable 7” - 10.5”
• Grinding Pressure: 100 lbs
• Weight: 355 lbs
• Motor: 3 hp
• Engine Speed: Variable to 750 RPM

CPS

CPS G-120 Multi - 1/220 Kit

$6,500.00

Add to Cart

CPS G290 Electric Kit (CPS-GPMC0307K)
The G290XT Electric has a 10HP motor and can be configured in single or 3Ph power. This grinder features a bell- shaped shroud allowing the operator to get under racks and base cabinets. This machine gives the production rates of larger machines and affordability.

Technical Data
• Power Requirements: Single-phase / 230v / 30 amp
Three-phase/480v/15amp
• Grinding Pressure: 400-470 lbs
• Grinding Width: 29”
• Weight: 655 lbs
• Motor: 10 hp
• Engine Speed: Variable to 1,800 RPM

CPS

CPS G290 Electric Kit

$19,000.00

Add to Cart

CPS G320 D Grinder Kit (CPS-GPMC0066K)
The CPS G320D is an extremely effective, heavy duty grinder. The 20HP electric motor is ideal to withstand the workout of heavy coatings removal and surface preparation, grinding and polishing concrete, terrazzo, marble, and granite.
Technical Data
• Power Requirements: 3-phase / 460v / 30 amp
• Grinding Pressure: 715 lbs
• Grinding Width: 32”
• Weight: 896 lbs
• Motor: 20 hp
• Engine Speed: Variable to 1,800 RPM

CPS

CPS G320 D Grinder Kit

ACS-CPS320Pro-Daily Rental Rate

ACS-CPS320Pro-Daily Rental Rate

$540.00

Add to Cart